FINO™ Slimline Sliding Door
Maximum view. Minimal sightline.
The FINO™ Sliding Door is IKON's minimalist sliding system, designed and manufactured in South Africa to compete with the top imported systems. You get maximum glass with a 25 mm visible interlock, and where the project allows, the whole frame can be concealed at the head, jambs and sill. Panels reach up to 5.85 metres high or wide, so there is very little between you and the outside.
The secret is the engineering behind the sightline: you see very little aluminium, but the deeper structure keeps big, heavy panels rigid. Upgrade with automation, with openings of up to 15 metres in one direction or 30 metres as a centre opening, or with bullet-resistant glass and armoured steel plate if security is a concern.
Shown: Dominic Pedreiro, CEO.
Drive it: the FINO™ Sliding Door in motion
You can't judge a slimline door from a photo. Start with the sightline: all you see is a 25 mm interlock. Then look at how the frame hides in the head, jambs and sill. Then slide it. A manual FINO™ panel weighing hundreds of kilograms glides on stainless steel rollers and rails. Block the automated version with your arm and it stops and reverses.
- 25 mm visible interlock for a minimal sightline
- Frame concealed in the head, jambs and sill, where the build allows
- Stainless steel rollers and rails for smooth, long-lasting movement
- Automated option: block it and it stops and reverses
- Floor tile or stone inserted into the track for a seamless finish inside and out
- 4-point locking, with the handle and lock integrated into the wall
For architects: a slimline sliding door you can specify early
Have you ever wondered how such a thin frame stays rigid when the glass gets this big? Think of a ruler: flat, it bends; on its edge, it holds. FINO™ works the same way. The visible interlock is just 25 mm, but the structural section behind it is deeper, so big, heavy panels stay rigid. The modular track joins to take as many panels as the opening needs, including open corner and pocket sliding designs. IKON engineers the configuration for each opening and works with your team from concept to shop drawings.
| Visible interlock | 25 mm, with a deeper structural section behind it (a heavy-duty interlock for taller doors keeps the same 25 mm visible width) |
|---|---|
| Glass-to-frame ratio | Up to 96.3% |
| Maximum panel size | Up to 5.85 m high and 5.85 m wide. Final size depends on the glass and the wind load, and IKON's technical team confirms each one |
| Maximum glazed area | Up to 11 m² per panel, depending on glass sheet availability |
| Maximum panel weight | 500 kg per panel |
| Automation | Optional, with commercial motors as used in shopping centres: durable and low maintenance. Up to 15 m in one direction, or 30 m as a centre opening. Stops and reverses on an obstruction |
| Control | One remote supplied. An access control company can connect any dry contact switch |
| Tracks | Concealed, flush or stepped track. Removable track insert takes the floor finish (tile, stone or engineered wood) |
| Rollers and rails | Stainless steel |
| Locking | 4-point locking. Handle and lock fit onto the wall, or onto the interlock profile |
| Configuration | Modular, unlimited panels by joining tracks. Open corner and pocket sliding options |
| Glass | Double glazed performance glass as standard, 41 mm glass cavity |
| Thermal performance | Uw values from 0.7 to 1.7 W/m²K, depending on the glazing |
| Security upgrade | Bullet-resistant glass, specified through your accredited IKON installation partner, and armoured steel plate inside the profiles |
| Finish | QUALICOAT-licensed powder coating |
| Water management and joints | HydraBase and structural silicone as standard |
The detail behind the view
A slimline door asks a lot of a small amount of aluminium. Big glass, heavy panels and a frame that disappears into the building need the detail around the door to be engineered too. IKON engineers what happens inside the profile, under the sill and in the installation, not just the panels.
Hidden depth, not thicker aluminium.
The face you see is 25 mm. Behind it, a deeper structural interlock carries the load, which keeps large FINO™ panels rigid without widening the sightline. IKON engineers the configuration for each opening.
HydraBase™ water management.
Every IKON window and door is paired with HydraBase, IKON's engineered secondary water-management interface beneath the frame. Buildings move over time, and water can find its way past joints. HydraBase collects that water and drains it outside, rather than letting it reach floors, skirtings and interior finishes. It is also what lets a FINO™ track sit flush with the floor, inside and out.
Used on more than 170 projects over six years.
Structural silicone and a QUALICOAT finish.
Structural silicone is standard on every IKON product: every frame joint is bonded with it, so the frame holds together and can move with the building without cracking. The aluminium is finished with QUALICOAT-licensed powder coating. Double glazing and thermal performance were designed into FINO™ from the start, with Uw values from 0.7 to 1.7 W/m²K depending on the glazing.
Installation methodology based on international standards, carried out by accredited IKON installation partners.
Maximum view. Minimal sightline.
Can you imagine standing in your home, enjoying that view, with almost nothing between you and the outside? With FINO™, the frame disappears into the building and all you see is a 25 mm line of aluminium. And it is just as effortless to live with: a manual panel glides open by hand, or the automated version opens the whole wall at the touch of a remote. Just like driving a high-performance car, it's all about the experience.
View
A 25 mm interlock and a glass-to-frame ratio of up to 96.3%, so the view takes over the room.
Integration
Conceal the frame in the head, jambs and sill, with your own tile or stone carried right into the track.
Scale
Panels up to 5.85 metres, and automated openings up to 15 metres one way or 30 metres as a centre opening.
Peace of mind
Block the automated door with your arm and it stops and reverses. Add bullet-resistant glass and armoured steel plate inside the profiles if security is a concern.
Don't just take our word for it. Slide the door and feel it for yourself.
Frequently asked questions
Is such a thin frame strong enough for big panels?
Yes. The visible frame is narrow, but the hidden structural section is deeper, which keeps large, heavy panels rigid. For taller doors, a heavy-duty interlock keeps the same 25 mm visible width. IKON engineers the configuration for each opening and confirms every panel size.
Why choose FINO™ over an imported minimalist system?
FINO™ is designed and manufactured in South Africa to compete with imported minimalist systems, with local support and competitive pricing.
How large can a FINO™ sliding door be?
Panels can be up to 5.85 metres high or wide, with up to 11 m² of glass per panel depending on glass sheet availability. Panels can weigh up to 500 kg each. Because the track is modular, you can join as many panels as the opening needs.
Can the FINO™ Sliding Door be automated?
Yes. FINO™ can be fully automated with commercial motors, the kind used in shopping centres, chosen for durability and low maintenance. Panels can weigh up to 500 kg each, and an automated opening can be up to 15 metres in one direction, or 30 metres as a centre opening. Block it and it stops and reverses.
How is the automated FINO™ door controlled?
One remote is supplied with the door. If you would like a wall switch or access control, an access control company can connect any dry contact switch to it.
Can I have a flush floor from inside to outside?
Yes. FINO™ comes with a concealed, flush or stepped track, and the removable track insert takes your own floor finish, so the same tile or stone runs from inside to out. With IKON sub-sills and installation methodology, and HydraBase beneath the frame, the floor can be level on both sides. Flush and concealed tracks need drainage planned into the project early, so speak to us at design stage.
How secure is the FINO™ Sliding Door?
FINO™ uses a 4-point locking mechanism, with the handle and lock fitted onto the wall or onto the interlock profile. For higher security, FINO™ can take bullet-resistant glass, specified through your accredited IKON installation partner, and armoured steel plate inside the profiles.
FINO™ or LARGO™: which sliding door should I choose?
FINO™ is IKON's minimalist collection: a slimline 25 mm interlock, concealed frames and very large panels. LARGO™ is the maximalist collection: a more substantial frame and heavy-duty hardware for large format, heavy panels. Both are designed and manufactured in South Africa. Visit the showroom to feel the difference.
Who installs the FINO™ Sliding Door?
IKON is a specialist window and door manufacturer. We design and manufacture the system, and installation is carried out by accredited IKON installation partners, specialist companies trained on our systems.

